DUROTEC provides the necessary solutions to repair the different pathologies that usually arise in concrete floors, such as problems with fissures, cracks, broken joints and their sealing.
We have a range of high-quality products based on fast-drying cold polyureas that quickly reach their resistance, reducing waiting times and being able to resume normal transit in work spaces, in less than 2 hours.
At Durotec we have the range of CreteFill Pro Series products, leading products in the market, with high performance and the most suitable for repair work.
It is used in the repair of deteriorated joints. When breaks appear at the edges of the expansion joints, their repair is recommended to avoid weakening the pavement and improve its resistance. Road traffic, among many other causes, can cause breaks in the joints of industrial pavements.
In the specific case of cracks, the use of CrackRepair is recommended. It is a bicomponent cold polyurea that does not require a primer. It is a semi-rigid material, so it adapts to the movement of the cracks. The ease with which concrete cracks is a consequence of its low tensile strength and low toughness. Cracks can appear after years, months, weeks, days and even hours and are caused by different causes.
The function of Cretefill Pro flexible joint sealing is to protect joint edges from damage caused by human or vehicular traffic, as well as other pressure-causing forces when applied to the expansion joint or a concrete slab. It is a polyurea elastomer, a semi-rigid material that provides the necessary flexibility to allow contraction and expansion movements of the concrete slabs.
DUROTEC-GLASSTONE S.L. ha recibido una ayuda para la ejecución del proyecto de Investigación y Desarrollo, de título “DESARROLLO DE PRODUCTO INTEGRAL PARA EL TRATA-MIENTO ECO – SOSTENIBLE Y PROTECCIÓN FRENTE A AGENTES QUÍMICOS DE PA-VIMENTOS DE HORMIGÓN” y número de expediente IDI-20230298, a través del Centro para el Desarrollo Tecnológico y la Innovación (CDTI), ayuda cofinanciada por el Fondo Europeo de Desarrollo Regional (FEDER) a través del Programa Operativo Plurirregional de España 2021 – 2027.
El objetivo general del proyecto consiste en el desarrollo de una tecnología ecosostenible e integral para el tratamiento de las superficies de hormigón en estado fresco que sea capaz de realizar de forma simultánea la densificación, el curado y la protección del hormigón. Asimismo, durante la ejecución, se cuenta con la colaboración de la entidad TESELA, Materiales, Innovación y Patrimonio S.L.
El proyecto se desarrolla en las instalaciones de Andalucía en el periodo comprendido entre octubre de 2022 y septiembre 2024, y con un presupuesto total de ejecución de 435.245€.
